View LB104S01-TL02_7245576.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1/ 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 specification for approval title 10.4? svga tft lcd customer model supplier lg.philips lcd co., ltd. model lb104s01 suffix tl0 2 please return 1 copy for your confirmation with your signature and comments. / / / date signature products engineering dept. lg. philips lcd co., ltd h.y.lim / engineer prepared by b.h.ahn / manager reviewed by c.s. kyoung / g.manager date signature ) ) ( ( final specification ? preliminary specification www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 2/ 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 contents no item page cover 1 3-2 interface connections 7 10 9 precautions 24 a appendix. enhanced extended display identification data 26 3-5 color input data refernece 7-2 emc 21 8 packing 8-1 designation of lot mark 22 8-2 packing form 23 contents 2 record of revisions 3 1 general description 4 2 absolute maximum ratings 5 3 electrical specifications 3-1 electrical charactreistics 6 3-3 signal timing specifications 9 3-4 signal timing waveforms 9 3-6 power sequence 11 4 optical sfecifications 12 5 mechanical characteristics 16 6 reliablity 20 7 international standards 7-1 safety 21 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 3/ 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 record of revisions revision no revision date page description 0.0 june. 20. 2005 - first draft 0.1 aug. 22. 2005 4/24 changed power consumption : total 4w(typ) ? 3.66w(typ), changed weight: 300g(typ) ? 290g(typ) 6/24 changed power consumption : 0.7w(typ) ? 0.55w(typ),0.9w(max) ? 0.63w(max) 16/24 changed weight: 300g(typ) ? 290g(typ), 310g(max) ? 300g(max) 17/24 changed drawing of front view 18/24 changed drawing of rear view 20/24 vibration test (non-operat ing) condition was changed :[sine wave, 10 ~ 500 ~ 10hz, 1.5g, 0.37oct/min 3 axis, 1hour/axis] ? [random, 10 ~ 300hz,0.0035~0.0035g/hz 1.0grms, 1 axis, 0.5hour/axis] 20/24 shock test (non-operating) was changed :[half sine wave, 180g, 2ms one shock of each six faces(i.e. run 180g 6ms for all six faces)] ? [ half sine wave, 180g, 2ms one shock of each three faces (i.e. run 180g 6ms for all one faces)] 6/24 notes of lamp spec ification was updated. 6/24 changed operating volta ge & operating current :v bl.min : ? 473 : i bl.max : 7.0ma ? 6.5ma 1.0 oct. 21. 2005 1/24 preliminary specification ? final specification 1.1 oct. 25. 2005 4/24 changed power consumption : total 3.66 w(typ.) ? total 3.55 w(typ.) 6/24 changed lamp operating voltage : min 473 v rms / typ 485 v rms / max 625 v rms ? min 488 v rms /typ500v rms / max 640 v rms changed power consumption : typ 2.9w / max 3.2w ? typ 3.0w / max 3.3w changed note www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 4/ 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 1. general description general features active screen size jodift nn
ejbhpobm outline dimension )
y 7
y %
nn 5zq
)
nny 7
nn )
#z 7
1jyfmt3(#tusjqftbssbohfnfou cju dpmpst den 5zq
5pubm8buu 5zq
h 5zq
5sbotnjttjwf npef opsnbmmzxijuf "oujhmbsfibsedpbujoh )
pixel pitch pixel format color depth luminance, white power consumption weight display operating mode surface treatment the lb104s01 is a color active matrix liquid crystal display with an integral cold cathode fluorescent lamp (ccfl) backlight system. the matrix employs a-si thin film transistor as the active element. it is a transmissive type display operating in the normally white mode. this tft-lcd has 10.4 inches diagonally measured active display area with svga resolution(600 vertical by 800 horizontal pixel array). each pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors. the lb104s01 has been designed to apply the interface method that enables low power, high speed, low emi. the lb104s01 is intended to support applications where thin thickness, low power are critical factors and graphic displays are important. in combination wi th the vertical arrangement of the sub-pixels, the lb104s01 characteristics provide an excellent fl at display for office automation products such as mini-notebook pc or web-pad, etc. -7%4 5jnjoh $pouspm #mpdl 1pxfs #mpdl $pmvno%sjwfs$jsdvju 3px%sjwfs$jsdvju 5'5-$% 9
$pouspm%bub 1pxfs #bdlmjhiu"ttz cn2 $/ www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 5/ 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ? ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ? ] humidity[(%)rh] values parameter min max units power input voltage vcc -0.3 4.0 vdc at 25 5 c operating temperature t op 050 c1 storage temperature h st -20 60 c1 operating ambient humidity h op 10 90 %rh 1 storage humidity h st 10 90 %rh 1 notes symbol note : 1. temperature and relative humidi ty range are shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 6/ 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 3. electrical specifications 3-1. electrical characteristics the lb104s01 requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. the second i nput which powers the ccfl, is typically generated by an inverter. the inverter is an external unit to the lcd. table 2. electrical characteristics values parameter symbol min typ max module : power supply input voltage vcc 3.0 3.3 3.6 v dc power consumption pc - watt 1 differential impedance zm ohm 2 lamp : power consumption p bl - w@ 6ma rms established starting voltage at 25 ? at 0 ? vs 845 1015 v rms v rms 6 operating voltage v bl 488 (6.5 ma rms ) 500 (6.0 ma rms ) 640 (2.0 ma rms ) v rms tolerance: ? 10% operating current i bl 2.0 6.0 6.5 ma rms 3 operating frequency f bl 45 60 80 khz discharge stabilization time ts - - 3 min 4 life time 20,000 - - hrs 5 power supply input current i cc v 1 unit notes note) 1. the specified current and power consumption are under the vcc = 3.3v , 25 ? , fv = 60hz condition whereas full black pattern is displayed and fv is the frame frequency. 2. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 3. the typical operating current is 6marms for the typical surface luminance (l wh ) in optical characteristics. 4. define the brightness of the lamp after being light ed for 5 minutes as 100%, ts is the time required for the brightness of the center of t he lamp to be not less than 95%. 5. the life time is determined as the time at which brightness of lamp is 50% compare to that of initial value at the typical lamp current. 6. the ?max? of ? established starting voltage ? means the minimum voltage for inverter to turn on the ccfl normally in the lcd module. it should be careful that ? established starting voltage ? is changed by an increase of stray capacitance in your set, inverter method, value of ballast capacitor in your inverter and so on. especially, the value of ? established starting voltage ? is higher in low temperature condition than in normal temperature condition, because impedance of ccfl is increased. the voltage above vs should be applied to the lamps for more than 1 second for start-up. 7. lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. 8. the lamp power consumption shown above does not include loss of external inverter. the applied lamp current is a typical one. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 7/ 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 note) 9. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp, are following. it shall help increase the lamp lifetime and reduce leakage current. a. the asymmetry rate of the inverter waveform should be less than 10%. b. the distortion rate of the waveform should be within 2 2 ? 10%. * inverter output waveform had better be more similar to ideal sine wave. ? do not attach a conducting tape to lamp connecting wire. if the lamp wire attach to a conducting tape, tft-lcd module has a low luminance and the inverter has abnormal action. because leakage current is occurred between lamp wire and conducting tape. i p i -p * asymmetry rate: | i p ?i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / irms www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 8/ 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 table 5. backlight connector pin configuration (cn2) notes : 1. the high voltage side terminal is colored pink and the low voltage side terminal is black. pin symbol description notes 1 hv power supply for lamp (high voltage side) 1 2 lv power supply for lamp (low voltage side) 1 3-2. interface connections table 3. module connector pin configuration (cn1) pin symbol description notes 1 vcc power supply, 3.3v typ. 2 vcc power supply, 3.3v typ. 11 a3m negative lvds differential data input 12 a3p positive lvds differential data input 13 gnd ground 14 clkm negative lvds differential clock input 15 clkp positive lvds differential clock input 16 gnd ground 17 gnd ground 18 gnd ground 19 gnd ground 20 gnd ground 3 gnd ground 4 gnd ground 5 a1m negative lvds differential data input 6 a1p positive lvds differential data input 7 gnd ground 9 a2p positive lvds differential data input 8 a2m negative lvds differential data input 10 gnd ground 1, interface chips 1.1 lcd : sw, sw0602_u(lcd controller) including lvds receiver 1.2 system : thc63lvdm63a or equivalent * pin to pin compatible with ti lvds 2. connector 2.1 lcd : gt100-20p-ls-smt, ls cable or equivalent 2.2 mating %jtdsfuf8jsfuzqf%'(4$ )*304&
'1$uzqf%'(4' )*304&
2.3 connector pin arrangement this lcd employs two interface connections, a 20 pin c onnector is used for the module electronics interface and the other connector is used for the integral backlight system. the electronics interface connector is a mode l gt100-20p-ls-smt manufactured by ls cable. 4pvsdf 1$# <-$%.pevmfsfbswjfx> the backlight interface connector is a model bhsr -02vs-1, manufactured by jst or compatible. the mating connector part number is sm02b-bhss-1 or equivalent. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 9/ 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 3-3. signal timing specifications table 6. timing table item symbol min typ max unit note dclk frequency f clk mhz period t hp 990 1024 1100 width t wh 12 - 120 period t vp 606 625 730 t hp horizontal back porch t hbp 30 - - t clk horizontal front porch t hfp 30 - - vertical back porch t vbp 2- - t hp vertical front porch t vfp 3- - width t wv 1-24 t clk hsync vsync data enable this is the signal timing required at the input of the us er connector. all of the interface signal timing should be satisfied with the following specifications and spec ifications of lvds tx/rx for its proper operation. 3-4. signal timing waveforms condition : vcc =3.3v low: 0.3vcc high: 0.7vcc data enable, hsync, vsync hsync data enable vsync data enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva t clk 0.5 vcc dclk www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 10 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 3-5. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. table 7. color data reference input color data red msb lsb green msb lsb blue msb lsb black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red green blue cyan magenta yellow white red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green ... ?? ? green (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red ? ?? ? red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (00) blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ? ?? ? blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 11 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 3-6. power sequence note) 1. please avoid floating state of interface signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply for lcd vcc to 0v. 3. lamp power must be turn on after power supply for lcd and interface signal are valid. value parameter min. typ. max. t 1 - - 10 (ms) t 2 0 - 50 (ms) t 3 200 - - (ms) t 4 200 - - (ms) t 5 0 - 50 (ms) t 6 - - 10 (ms) t 7 400 - - (ms) units table 8. power sequence table t 6 interface signal, v i (lvds signal of transmitter) power for lamp power supply for lcd vcc 90% 10% 10% 0v 90% t 1 t 2 t 5 valid data 0v off off lamp on t 7 t 3 t 4 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 12 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 4. optical specification fig. 1 optical characteristic measurement equipment and method table 9. optical characteristics ta=25 c, vcc=3.3v, f v =60hz, f clk = 38.5mhz, i bl = 6.0ma values parameter symbol min typ max luminance variation white --1.4 3 response time 4 color coordinates viewing angle 5 rise time delay time red green blue by 0.096 0.126 0.156 white wx 0.275 0.305 0.335 x axis, right( =0 ) r 65 - - degree x axis, left ( =180 ) y axis, up ( =90 ) y axis, down ( =270 ) l 65 - - degree u 45 - - degree d 55 - - degree wy 0.290 0.320 0.350 tr d -1930ms rx 0.543 0.573 0.603 gx 0.279 0.309 0.339 gy 0.513 0.543 0.573 ry 0.297 0.327 0.357 tr r -610ms bx 0.118 0.148 0.178 contrast ratio cr 300 400 - 1 surface luminance, white l wh 200 250 - cd/m 2 units notes 2 lcd module optical stage(x,y) pritchard 880 or equivalent 50cm optical characteristics are determined after the unit has been ?on? and stable for approximately 30 minutes in a dark environment at 25 c . the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . fig. 1 presents additional information conc erning the measurement equipment and method. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 13 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 note) 1. contrast ratio(cr) is defined mathematically as surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the center point across the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 1. l wh = l 1 3. the variation in surface luminance , the panel total variation ( white ) is determined by measuring l n at each test position 1 through 5 and then defined as followed numerical formula. for more information see fig 2. maximum(l 1 ,l 2 , ? l 5 ) white = minimum(l 1 ,l 2 , ? l 5 ) 4. response time is the time required for the display to transition from white to black (rise time, tr r ) and from black to white(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contra st ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the lcd surface. for more information see fig 4. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 14 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 fig. 3 response time the response time is defined as the following figure and shall be measured by switching the input signal for ?black? and ?white?. tr r tr d 100 90 10 0 % optical response white black white fig. 2 luminance nfbtvsjohqpjougpsmvnjobodfwbsjbujpo nfbtvsjohqpjougpst vsgbdfmvnjobodf ) " # 7 "dujwf"sfb ")nn #7nn )nn 7nn !) 7"dujwf"sfb ) 7 ) 7 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 15 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 fig. 4 viewing angle normal y e = 0 , right = 180 , left = 270 , down = 90 , up www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 16 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 5. mechanical characteristics the contents provide general mechanical characteristics for the model lb104s01. in addition the figures in the next page are detailed mechanical drawing of the lcd. horizontal 224.5 0.5mm vertical 172.0 0.5mm vertical 161.8 0.5mm vertical 158.4 mm weight 290g (typ.) 300g (max.) depth 5.7 0.3mm horizontal 217.2 0.5mm horizontal 211.2 mm active display area bezel area outline dimension www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 17 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 note) unit:[mm], general tolerance: 0.5mm www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 18 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 note) unit:[mm], general tolerance: 0.5mm www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 19 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 [ detail description of side mounting screw ] note) unit:[mm], general tolerance: 0.5mm www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 20 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition. no. test item conditions 1 high temperature storage test ta= 60 c, 240h 2 low temperature storage test ta= -20 c, 240h 3 high temperature operation test ta= 50 c, 50%rh, 240h 4 low temperature operation test ta= 0 c, 240h 5 vibration test (non-operating) random, 10 ~ 300hz,0.0035~0.0035g/hz 1.0grms, 1 axis, 0.5hour/axis 6 shock test (non-operating) half sine wave, 180g, 2ms one shock of each three faces (i.e. run 180g 6ms for all one faces) 7 altitude operating storage / shipment 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 21 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 7. international standards 7-1. safety a) ul 60950-1:2003, first edition, underwriters laboratories, inc., standard for safety of information technology equipment. b) can/csa c22.2, no. 60950-1-03 1 st ed. april 1, 2003, canadian standards association, standard for safety of information technology equipment. c) en 60950-1:2001, first edition, european committee for electrotechnical standardization(cenelec) european standard for safety of information technology equipment. 7-2. emc a) ansi c63.4 ?methods of measurement of radio- noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. ?american national standards institute(ansi), 1992 b) c.i.s.p.r. ?limits and methods of measurement of radio interface characteristics of information technology equipment.? international special committee on radio interference. c) en 55022 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? european committee for electrotechnical standardization.(cenelec), 1998 ( including a1: 2000 ) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 22 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 8. packing 8-1. designation of lot mark a) lot mark abcdefghi jklm a,b,c : inch d : year e : month f : panel code g : factory code h : assembly code i,j,k,l,m : serial no note 1. year 2. month year 97 98 99 2000 2001 2002 2003 2004 2005 2006 mark 6 24 035 1 2007 789 7 month jan feb mar apr may jun jul aug sep oct nov mark b a 68 479 5 dec 123 c 5. serial no serial no. 1 ~ 99,999 100,000 ~ mark 00001 ~ 99999 a0001 ~ a9999, ----, z 9999 4. factory code factory code lpl gumi lpl nanjing mark c hee sung kd 3. panel code panel code p1 factory p2 factory p3 factory p4 factory p5 factory 45 3 hydis panel 2h mark 1 b) location of lot mark serial no. is printed on the label. the label is attached to the backside of the lcd module. this is subject to change without prior notice. 8-2. packing form a) package quantity in one box : 26 pcs b) box size : 425mm(l) ? 246mm(w) ? 287mm(h) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 23 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mo unting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plat e to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently wi th absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possib le. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage : v= ? 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperatur e change. condensation makes damage to polarizer or electrical contacted parts. and after fadi ng condensation, smear or spot will occur. (5) when fixed patterns are displayed for a l ong time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 24 / 24 lb104s01 liquid crystal display ver. 1.1 oct. 25, 2005 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wris t band etc. and don?t touch interface pin directly. 9-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) when the protection film is peeled off, static el ectricity is generated bet ween the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarizer with a small amount of glue. if some stress is applied to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film without rubbing it against the polarizer. (3) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the polarize r after the protection film is peeled off. (4) you can remove the glue easily. when the glue remains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precaution s for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LB104S01-TL02

	To Download LB104S01-TL02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .